This Package Includes
- Kanto TUK G2 Powered Speaker System with Bluetooth 5.4
- AudioQuest Jack Russell Subwoofer Cable - 13.12 ft. (4m)
Kanto TUK G2 Powered Speaker System with Bluetooth 5.4
Timeless design, focused performance. Tuk delivers high-quality sound through refined acoustics, durable construction, and intuitive usability. A redesigned cabinet, updated DSP, and precision crossover provide a balanced, detailed response. AMT tweeters and 5.25" aluminum woofers ensure clarity and depth, with versatile connectivity for any setup.
Features
- Air Motion Transfer (AMT) Tweeters & 5.25” Aluminum Concave Drivers
- 260W Peak Power Class D Amplifier (130 Watts Total RMS)
- 40 Hz - 20 kHz Frequency Response with 80 Hz low/high pass filter
- Optical (TOSLINK) (24 bit/96 kHz) Audio
- Bluetooth® 5 with Qualcomm® aptX™ HD
- USB Audio Input, RCA input, & Dedicated Phono Pre-amp RCA Input
- Headphone Output, Subwoofer Output, USB Charge Port
- Auto-Power down and Auto-Power up modes
- Acoustic Grade MDF Rear Ported Cabinets
Elevated Acoustic Engineering
Tuk features ultra-quick AMT tweeters and 5.25” aluminum concave woofers, now supported by a redesigned cabinet with increased volume for a more stable acoustic platform.
Refined DSP & Tuning
Updated DSP tuning and an improved crossover result in a balanced, neutral presentation that remains faithful to the recording, delivering a more natural sound compared to previous generations.
Architectural Design
With sharper geometry and more defined lines, the updated form reduces edge diffraction while providing a confident, intentional presence that contributes to the aesthetics of a room.
Intelligent Subwoofer Integration
Tuk prioritizes core performance by handling high-pass and low-pass filter settings automatically when a subwoofer is connected, allowing the speakers to focus on mid and high-frequency detail.
Modern Connectivity
Bluetooth 5.4 with aptX Adaptive enables seamless high-resolution streaming, while USB-C, optical, and dual RCA inputs ensure compatibility with both contemporary and legacy gear.
AudioQuest Jack Russell Subwoofer Cable - 13.12 ft. (4m)
Connect amplifiers, receivers, soundbars, and AVRs to subwoofers with a purpose-built RCA cable designed for clean, reliable signal transfer. Jack Russell features Solid Long-Grain Copper (LGC) conductors to reduce distortion caused by grain boundaries, Foamed-Polyethylene insulation to maintain dynamic contrast, and a Metal-Layer Noise-Dissipation system that helps dissipate and drain high-frequency noise away from the signal path. The result is more naturally beautiful and detailed music, more intelligible dialogue, and thrilling sound effects for home theater and music systems.
Features
- Solid Long-Grain Copper (LGC) Conductors
- Foamed-Polyethylene (FPE) Insulation
- Metal-Layer Noise-Dissipation
- Cold-Welded, Gold-Plated Terminations
- Direction-Controlled Conductors
Solid Long-Grain Copper (LGC) Conductors
The surface quality is critical because a conductor can be considered as a rail-guide for both the electric fields within a conductor and for the magnetic fields outside the conductor. High-purity LGC minimizes distortion caused by grain boundaries and maximizes linear RF Noise-Dissipation.
Foamed-Polyethylene (FPE) Insulation
Any solid material adjacent to a conductor is part of an imperfect circuit and absorbs energy. Some of this energy is stored and then released as distortion. Because air absorbs next to no energy and Polyethylene is low-loss and has a benign distortion profile, Foamed-PE, with its high air content, causes much less of the out-of-focus effect common to other materials.
Metal-Layer Noise-Dissipation
It’s easy to accomplish 100% shield coverage. Preventing captured radio-frequency interference from modulating the equipment’s ground reference requires AQ’s Noise-Dissipation. Traditional shield systems typically absorb and then drain noise/RF energy to component ground, modulating and distorting the critical reference ground plane, which in turn causes a distortion of the signal. Noise-Dissipation “shields the shield,” absorbing and reflecting most of this noise/RF energy before it reaches the layer attached to ground.
Cold-Welded, Gold-Plated Terminations
Instead of solder, the process employs a high-pressure technique. Because the ground shells are stamped instead of machined, the metal used can be chosen for low distortion instead of machinability.
Direction-Controlled Conductors
All drawn metal strands or conductors have a non-symmetrical, and therefore directional, grain structure. AudioQuest controls the resulting RF impedance variation so that noise is drained away from where it will cause distortion.
