Make the most of your living space. With this wall-mount bracket, your TV blends beautifully into any room, like a work of art.
Connect to your home network using an Ethernet cable.
Separate Video and Audio HDMI Outputs
Send 4K HDR video and audio to your projector and AV amplifier separately, to ensure optimal sound quality.
Coax SPDIF Digital Outputs
Connect to amplifiers with digital and surround sound audio outputs.
Delve Deeper Into Your Favorites
Amplify the effect of every cinematic moment when you watch privately. The UBP-X800M2 supports BLUETOOTH audio transmission so you can use your favorite Bluetooth headphones for private viewing, without wires.
Hear Dialogue Clearly
Enjoy total clarity for dialogue and soundtracks, near or far away. The UBP-X800M2 can send audio to your TV via HDMI, and to a wireless speaker via BLUETOOTH connection, at the same time.
LDAC transmits 3x the data of normal BLUETOOTH connections, for high quality sound.
Stream audio around your home using the built-in Wi-Fi for a fast, full-quality wireless listening experience.
Better Viewing, Easier Access with Swivel Function
Swivel your wall-mounted TV up to 21° using the bracket. This allows you to quickly adjust the angle of the TV, for an optimum viewing experience and easy access to connections.
Fits Close to the Wall
Despite featuring a swivel function, this bracket is slim enough to allow the TV to be mounted only 0.86 inches (22 mm) from the wall.
Vertically Straight with Magnet Lock
Fit your TV parallel to the wall. A magnet lock ensures the upper part of the TV does not lean forward when mounted close to the wall, for a more enjoyable viewing experience.
Safe and Easy Installation
The Ultra Slim Wall-Mount Bracket is designed for safe and easy installation, while the magnetic lock system and lateral shift bracket provide secure installation.
Swivels up to 21°
Hang your TV 0.86" from the wall
Weight: 9.3 lbs.
What's in the Box
What's in the Box:
SU-WL855 Wall-Mount Bracket
Customer Reviews for Sony SU-WL855 Ultra Slim Swivel TV Mount for Sony OLED TV
I bought this mount as it seemed to fit snuggly to the wall, was going to use this on my new x950h 75 inch tv. Upon starting the install, directions call out the removal on 4 screws on the back of the tv and mount the provided braket using the provided screws. Unfortunately, the screws that are removed from the tv are resessed about an inch from the back plastic, and the screws provided are exactly the same length as the ones removed. Now, when the bracket is placed on the back of the tv there is no way for the screws to reach the holes. I contacted customer support. They are going to send me the correct screws, but now I'm concerned placing the bracket on the back and tightening the screws may put undesired pressure on the plastics. I'll update this when the new screws come in.....so in a nutshell...this mounting kit does not come with the needed hardware to mount a 75 inch x950h tv
I bought this two months ago for a new A8H 55" TV. It mounts very close to the wall and the magnet on top pulls the top of the TV flush for perfectly vertical viewing. It's also easy to pull out to access the playstation that is built into a cavity behind the TV. Very happy with this purchase.
Bought this and had it installed by someone who does these types of installs. It’s now starting to tilt forward on my 65x900h. I’m worried that this will continue to occur causing stress on the mount and television.
I just bought Sony XBR85H900 model, and the user manual clearly stated that this Sony wall mount would support. So I bought this Sony wall mount TV. But it turns out that it does not support any TV higher than 77”. The horizontal bar that hold the tv is too short for 85” TV.
Sony, do you have the horizontal bar that can hold 85” TV 400x400 size?
It fits flush to the wall even with all wiring. It took me about 30 minutes to mount it myself, which was very easy. It took another 15 minutes to route the wiring. The wiring should be routed around the edge of the TV outputting to the wall mount at the top. The wall mount should be above the bracket so that the wiring flows right into it.
The manufacture of this piece is top notch. HOWEVER! The pictures don't show any wiring to the TV. Just spent 6 hours routing and rerouting cabling so that the TV can sit flush and be pulled and tilted. Even with a recessed AC outlet, the TV power pushed against the TV enough that it wouldn't sit flush. 3 HDMI'S pushed against the TV enough to make it not stay seated. VERY FRUSTRATING! Will NOT be recommending this to ANYONE. As a note: I install a/v for the past 13 years professionally.
Have a functionality, compatibility, or otherwise product-specific question about this product? Ask it here! If you have a customer service or shipping question, please direct it to our customer service department