Kenwood X802-5 eXcelon 500-Watt Class D 5-Channel Amplifier

Model: X802-5 UPC: 019048226211 Item: 173554

Product Information

X802-5 eXcelon 500-Watt Class D 5-Channel Amplifier

Highlights:

  • Max Power 1600W
  • Size (inch) (W) 9-3/4" x (H) 2-1/16" x (D) 6-5/8"
  • Variable High & Low Pass Filter
  • Bass Boost
  • Optional Wired Remote Ready

Rich and Immersive High-Resolution Audio

High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.

Output Coil with Magnetic Shield

Prevents magnetic flux from radiating from the subwoofer's coil, resulting in reduced noise and enhanced sound quality.

Sliding Terminal Cover

Detachable sliding terminal cover offers a sleek design and easier installation.

Variable Gain Circuit

Improved Signal to Noise Ratio.

One-side Connection

All terminals and connections are on one side for easier installation and a cleaner look.

Speaker Level Input Harness

Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.

Optional Wired Level Control Ready

The optional KCA-RC01A wired remote level control allows you to easily adjust the subwoofer volume.

Specifications

Specifications:

CTA-2006 Primary Ratings

  • Power Output: 50 Watts RMS x 4 + 300 Watts RMS x 1 at 4 Ohms and ≤1%THD+N
  • Signal-to-Noise Ratio: 80dBA (Reference: 1Watt into 4Ohms)

Maximum Power Output       

  • MAX POWER: 1600W

Rated Power Output at 14.4V            

  • A/B (4 Ohms): 50Watts RMS x 4 (4 Ohms, 20-20kHz, ≤1.0% THD)
  • A/B (2 Ohms): 75Watts RMS x 4 (2 Ohms, 1kHz, ≤1.0% THD)
  • SUB (4 Ohms): 300Watts RMS x 1 (4 Ohms, 20-200Hz, ≤0.5% THD)
  • SUB (2 Ohms): 500Watts RMS x 1 (2 Ohms, 100Hz, ≤0.5% THD)
  • A/B (Bridged 4Ohms): 150Watts RMS x 2 (Bridged 4 Ohms, 1kHz, ≤1.0% THD)

Specifications

  • Signal to Noise Ratio: 100dB (Reference: Rated Power into 4Ohms at 14.4V)
  • Frequency Response: 20Hz-50kHz (+0dB, -3dB)
  • Frequency Response: 20Hz-200Hz (+0dB, -3dB) SUB
  • Input Impedance: 10k ohm
  • Speaker Impedance: 4Ω (2Ω to 8Ω allowable)
  • Bridged Connection: 4Ω to 8Ω allowable

Audio Section           

  • Low-Pass Filter: 50Hz-200Hz, -24dB/oct
  • High-Pass Filter: 50Hz-200Hz, -12dB/oct (A/B)
  • Bass Boost: 40Hz, 0dB - +18dB
  • Infrasonic Filter: -
  • RCA Input Sensitivity: 0.2[V] - 5.0 [V]
  • Speaker Level Input Sensitivity: 4.0[V] - 12.0 [V]

Terminals       

  • Battery & Ground: M6 Screw Type Terminal Block
  • Speaker Output: M4 Screw Type Terminal Block

General          

  • Dimensions(WxHxD): (W)9-3/4" x (H) 2-1/16” x (D)5-7/8”
  • Dimensions(WxHxD): (W) 248cm x (H) 53cm x (D) 169cm
  • Weight: 4.6 lbs ( 2.1 kg)
  • Operating Voltage: 14.4V(11-16V allowable)
  • Current Consumption: 42 [A]

Key Features  

  • High-Res Audio Compliant
  • CTA-2006 Compliant
  • 2 Ohms Load Capability
  • One Sided Connection
  • Speaker Level Input with Signal Sensing Turn-on

Accessories   

  • Signal Sensing Turn-On
  • Remote Level Control Ready ( Optional KCA-RC01A)
  • Terminal Cover
  • Power MOS-FET Switching Power Supply
  • Extruded Aluminum Heat Sink Design
  • A B Sub Independent Gain Adjustment
  • A B AB(MIX) Independent Gain Adjustment

 

What's in the Box

What's in the Box:

  • X802-5 amplifier
  • Speaker level input harness
  • Mounting screws
  • Owner's manual

Documents

Reviews

Customer Reviews for Kenwood X802-5 eXcelon 500-Watt Class D 5-Channel Amplifier

There are no reviews for this item. Write Review

Q&A

Customer Q & A

Have a functionality, compatibility, or otherwise product-specific question about this product? Ask it here! If you have a customer service or shipping question, please direct it to our customer service department

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Top