Kenwood X302-4 eXcelon 50 Watts x 4 4-Channel Class D Amplifier

Model: X302-4 UPC: 019048226242 Item: 173223

Product Information

X302-4 eXcelon 50 Watts x 4 4-Channel Class D Amplifier

Highlights:

  • Max Power 600W
  • Size (inch) (W) 8-3/8" x (H) 2-1/16" x (D) 5-7/8"
  • Variable High & Low Pass Filter
  • Bass Boost

Rich and Immersive High-Resolution Audio

High-Resolution Audio is high-quality sound that exceeds CD standard. High-resolution audio captures and beautifully expresses all the details of your favorite music. Through ultra-high and low frequencies, immerse yourself in a rich and high-quality sonic experience.

Sliding Terminal Cover

Detachable sliding terminal cover offers a sleek design and easier installation.

Variable Gain Circuit

Improved Signal to Noise Ratio.

One-side Connection

All terminals and connections are on one side for easier installation and a cleaner look.

Speaker Level Input Harness

Speaker Level Input Harness is included to connect to speaker wires from factory installed receivers.

Specifications

Specifications:

CTA-2006 Primary Ratings

  • Power Output: 50 Watts RMS x 4 at 4 Ohms and ≤1%THD+N
  • Signal-to-Noise Ratio: 85dBA (Reference: 1Watt into 4Ohms)

Maximum Power Output       

  • MAX POWER: 600W

Rated Power Output at 14.4V            

  • A/B (4 Ohms): 50Watts RMS x 4 (4 Ohms, 20-20kHz, ≤1.0% THD)
  • A/B (2 Ohms): 75Watts RMS x 4 (2 Ohms, 1kHz, ≤1.0% THD)
  • SUB (4 Ohms): -
  • SUB (2 Ohms): -
  • A/B (Bridged 4Ohms): 150Watts RMS x 2 (Bridged 4 Ohms, 1kHz, ≤1.0% THD)

Specifications

  • Signal to Noise Ratio: 100dB (Reference: Rated Power into 4Ohms at 14.4V)
  • Frequency Response: 20Hz-50kHz (+0dB, -3dB)
  • Frequency Response: -
  • Input Impedance: 10k ohm
  • Speaker Impedance: 4Ω (2Ω to 8Ω allowable)
  • Bridged Connection: 4Ω to 8Ω allowable

Audio Section           

  • Low-Pass Filter: 50Hz-200Hz, -24dB/oct
  • High-Pass Filter: 50Hz-200Hz, -12dB/oct (A/B)
  • Bass Boost: 40Hz, 0dB - +18dB
  • Infrasonic Filter: -
  • RCA Input Sensitivity: 0.2[V] - 5.0 [V]
  • Speaker Level Input Sensitivity: 4.0[V] - 12.0 [V]

Terminals       

  • Battery & Ground: M6 Screw Type Terminal Block
  • Speaker Output: M4 Screw Type Terminal Block

General          

  • Dimensions(WxHxD): (W)8-3/8” x (H)2-1/16” x (D)5-7/8”
  • Dimensions(WxHxD): (W) 213cm x (H) 53cm x (D) 149cm
  • Weight: 3.3 lbs ( 1.5kg)
  • Operating Voltage: 14.4V(11-16V allowable)
  • Current Consumption: 20 [A]

Key Features  

  • High-Res Audio Compliant
  • CTA-2006 Compliant
  • 2 Ohms Load Capability
  • One Sided Connection
  • Speaker Level Input with Signal Sensing Turn-on

Accessories   

  • Terminal Cover
  • Power MOS-FET Switching Power Supply
  • Extruded Aluminum Heat Sink Design

 

What's in the Box

What's in the Box:

  • X302-4 amplifier
  • Speaker level input harness
  • Mounting screws
  • Owner's manual

Documents

Reviews

Customer Reviews for Kenwood X302-4 eXcelon 50 Watts x 4 4-Channel Class D Amplifier

There are no reviews for this item. Write Review

Q&A

Customer Q & A

Have a functionality, compatibility, or otherwise product-specific question about this product? Ask it here! If you have a customer service or shipping question, please direct it to our customer service department

Start typing your question and we'll check if it was already asked and answered. Learn More
Browse 1 question Browse 1 question and 1 answer
Will this be too much for just 1 sub?
Stone on Apr 24, 2021
  Thanks for your inquiry. The X302 can bridged as a 3 channel amp, bridge channel at 150watts to the sub and two channels for satellites at 50 watts each. It cannot be bridged as a single channel amp.
Top