Dynaudio Emit 50 Floorstanding Loudspeakers - Pair

Model: EMIT50BKPR UPC: 709081999691 Item: 3444

$2,249.00 OR

Color: Black - In Stock

Shipping Information
Show Store Details
Address:
754 Route 309 (Bethlehem Pike) Montgomeryville, PA 18936
Hours:
  • Mon: CLOSED
  • Tues - Sat: 10AM - 5PM
  • Sun: CLOSED
Phone:
(215) 368-8343
Show Store Details
Address:
38 Greenfield Avenue, Ardmore, PA 19003
Hours:
  • Mon: CLOSED
  • Tues - Sat: 10AM - 5PM
  • Sun: CLOSED
Phone:
(610) 649-7002
Choose a Store Location

More Product Details

Our product experts are here to help

Questions? We're here to help.

Product Information

Hi-fi starts with Emit.

Emit is your way into true high-end Danish hi-fi. Enjoy your music and films in a way you never thought possible at the price, thanks to premium Dynaudio acoustic technology.

The floorstanding Emit 50 is a grown-up speaker that will remain composed and have a clean sound even at high listening levels. Emit 50 is a 3-way configuration and features double 18 W MSP woofers, 15 W MSP midrange, and a Cerotar tweeter. The dedicated midrange utilizing a lightweight aluminum voice coil, responding very fast to music signal and giving a cleaner more precise midrange reproduction, supported by double 18 cm woofers that dig deep into the bass region with control and without interfering with the midrange.

Emit 50 is perfect for room sizes between 15-30 sqm Recommended +1000 euro amplifier with power between 50 and 250-watt power. To make sure that Emit 50 has a solid foothold, Dynaudio has taken the feet from Evoke 50 which includes both spikes and rubber feet.

Cerotar tweeter with Hexis inner dome

All EMIT models use the Cerotar tweeter used in Evoke. The Cerotar tweeter makes use of the Hexis inner dome, which was first unveiled in the new Confidence. The Hexis optimizes the acoustic properties of the cavity behind the tweeter dome, resulting in smoother frequency response. The optimized magnet system uses Ferrite magnets, increasing the sensitivity of the tweeter. These developments result in a dynamic, detailed, and natural treble response, with a very low level of listening fatigue. 

New 18 cm Woofers

The 18 cm MSP cones used in EMIT 20 and 50 utilizes the same MSP cone as Evoke, a new surround, and a dual-stacked strontium carbonite Ferrite+ ceramic magnet system. This focus and increases the strengths of the magnetic field around the voice coil, giving a higher B/L or more “motor power”. This improves efficiency and the voice coil will move cone with force and precision

  • 0.4mm MSP diaphragm
  • Glassfibre voice coil former
  • 52mm Copper voice coil
  • Nomex spider
  • Double Ferrite Magnets
  • New surround allowing longer throw ratio.

Crossover

EMIT models uses 1st order crossovers tweeters, 2nd order for midrange and mid-woofer. Emit 50 uses 4th order crossover for the woofers.

Beautiful finishes

Emit will be available in three finishes: Black ash vinyl, White vinyl, Walnut vinyl

The quality of this vinyl is so high that it requires a trained eye to see the difference between reel wood veneer and vinyl. Making these finishes an ok trade-off when cutting cost compared to the real wood veneer and High Gloss finish of Evoke.  

Cover rings on drivers

EMIT features newly designed cover rings to give the speaker a stylish, simplistic look that emphasizes the quality of the cabinet finish as well as the actual moving parts of the drivers. The cover rings are one-piece molded with the surface finish embedded in the molding process, which eliminates the need for a top layer lacquering. This ensures a nice finish that will not deteriorate over time.

Specifications

Specifications

  • Data: Emit 50
  • Sensitivity: 86dB (2.83V/1m)
  • IEC Power Handling: 240 watt
  • Impedance: 4 Ohm
  • Frequency response (± 3 dB): 41Hz - 20kHz (-6dB 35 Hz)
  • Box principle: 2 X Bass reflex rear double flared port
  • Crossover: 3-way
  • Crossover frequency: 540/4400Hz
  • Crossover topology: 1ST order tweeter  2nd order midrange, 4th order woofer
  • Tweeter: Cerotar soft dome with Hexis
  • Midrange: 15cm MSP
  • Woofer: 2 X 18 cm MSP
  • Dimensions & Weight per Speaker     
    • Dimensions (W x H x D): 8.1" x 44.9" x 12.3"
    • Dimensions with feet/grill (W x H x D): 11.9" x 46.7" x 14.8"
    • Weight: 57.2 lb

What's in the Box

What's in the Box

  • 2x Emit 50
  • 2x Grill
  • Dome Protector Yellow
  • Foam Plug
  • Accessory Pack
    • Emit Foot
    • Emit Spike
  • Instructions for Use
  • Safety Information
  • Warranty Extension Card

Reviews

Customer Reviews for Dynaudio Emit 50 Floorstanding Loudspeakers - Pair

There are no reviews for this item. Write Review

Q&A

Customer Q & A

Have a functionality, compatibility, or otherwise product-specific question about this product? Ask it here! If you have a customer service or shipping question, please direct it to our customer service department

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Top