Astell & Kern SEM2 Interchangeable All-in-One Module for the SE180

Model: 3PAP120C-CMSIN1 UPC: 821566018120 Item: 176367

$349.00 OR

In Stock
Shipping Information
Show Store Details
Address:
754 Route 309 (Bethlehem Pike) Montgomeryville, PA 18936
Hours:
  • Mon: CLOSED
  • Tues - Sat: 10AM - 5PM
  • Sun: CLOSED
Phone:
(215) 368-8343
Show Store Details
Address:
38 Greenfield Avenue, Ardmore, PA 19003
Hours:
  • Mon: CLOSED
  • Tues - Sat: 10AM - 5PM
  • Sun: CLOSED
Phone:
(610) 649-7002
Choose a Store Location

More Product Details

Our product experts are here to help

Questions? We're here to help.

Shop Packages
Created by our experts for your convenience.
We've done the research for you and created custom packages to make it easier for you to choose components that pair well together.

Product Information

Shape Your Sound With SEM2

SEM2 is an Interchangeable All-in-One module for the SE180. Shape your Sound with the Asahi Kasei AK4497EQ Dual DAC SEM2 module. The SEM2 module allows you to give your SE180 a different sound than the bundled module. The SEM2 supports up to 32bit/768kHz bit-to-bit playback and Native DSD512.

Next-Generation Advanced AMP Technology

Next-generation AMP technology is also applied in the SEM2 all-in-one module. From the selection of OP-AMP parts to circuit design, board layout, and tuning, everything has been completely redesigned to produce the best sound.

Even with a high output, the signal-to-noise (SNR), one of the important measurements of audio performance, boasts an amazing 127dB (based on AK4497EQ Dual, Balanced, High Gain).

Circuit Separation Structure of Main Body and Module

By physically separating the main body from the All-in-One module, it completely blocks power and RF noise that may occur from the main body.  This creates an independent structure that prevents noise from interfering with music playback.

Balanced and unbalanced signals are separated for each channel to provide the best possible sound through independent circuit design without interference.

Astell&Kern Audio Technology Forms the  TERATON ALPHA Sound Solution

TERATON ALPHA is AK's ultimate Sound Solution to produce audio playback that is close to the original sound through the audio output interface by use of effective power noise removal, efficient power management, and amplification with minimal distortion. TERATON ALPHA features Astell&Kern's patented technologies, which are the result of tens of thousands of hours of continuous research and development to produce sound close to the original sound the artist and producer intended.

 

Specifications

Specifications

  • General Specifications
    • Product Name: SEM2
    • Mode: PAP12
    • Body Material: Aluminum, Stainless Steel, Polycarbonate
    • Body Color: Moon Silver
    • Sample Rate:
      • PCM: 8kHz ~ 768kHz (8/16/24/32bits per Sample)
      • DSD Native: DSD64 (1bit 2.8MHz), Stereo / DSD128 (1bit 5.6MHz), Stereo / DSD256 (1bit 11.2MHz), Stereo
    • Output: Unbalanced Out (3.5mm), Balanced Out (2.5mm, only 4-pole supported / 4.4mm, only 5-pole supported)
    • Output Level:
      • [Normal Gain] Unbalanced 2Vrms / Balanced 4Vrms (Condition No Load)
      • [High Gain] Unbalanced 3Vrms / Balanced 6Vrms (Condition No Load)
    • DAC: AKM AK4497EQ x2 (Dual DAC)
    • Decoding: Support up to 32bit / 786kHz Bit-to-Bit playback
    • Dimensions (W x H x D): 3.03" x 2.99" x 0.78"
    • Weight: 3.53 oz
    • Operating Temperature: 32°F ~ 104°F
    • Playback Time: about 10.5 hours (FLAC, 16bit, 44.1kHz, Vol.50, LCD Off)
  • Audio Performance
    • Frequency Response: 
      • ±0.07dB (Condition: 20Hz ~ 20kHz) Unbalanced / ±0.06dB (Condition: 20kHz ~ 20kHz) Balanced 
      • ±0.68dB (Condition: 20Hz ~ 70kHz) Unbalanced / ±0.67dB (Condition: 20kHz ~ 70kHz) Balanced
    • Signal to Noise Ratio:
      • [Normal Gain] 122dB @ 1kHz, Unbalanced / 124dB @ 1kHz, Balanced
      • [High Gain] 125dB @ 1kHz, Unbalanced / 127dB @ 1kHz, Balanced
    • Crosstalk:
      • [Normal Gain] -138dB @ 1kHz, Unbalanced / -145dB @1kHz, Balanced
      • [High Gain] -138dB @ 1kHz, Unbalanced / -147dB @ 1kHz, Balanced
    • THD+N:
      • [Normal Gain] 0.0006% @ 1kHz, Unbalanced / 0.0005% @ 1kHz, Balanced
      • [High Gain] 0.0008% @ 1kHz, Unbalanced / 0.0006% @ 1kHz, Balanced
    • IMD SMPTE: 0.0002%, 800Hz 10kHz (4:1), Unbalanced / 0.0002%, 800Hz 10kHz (4:1), Balanced
    • Output Impedance: 3.5mm (1ohm) / 2.5mm (1.5ohm) / 4.4mm (1.5ohm)

Reviews

Customer Reviews for Astell & Kern SEM2 Interchangeable All-in-One Module for the SE180

There are no reviews for this item. Write Review

Q&A

Customer Q & A

Have a functionality, compatibility, or otherwise product-specific question about this product? Ask it here! If you have a customer service or shipping question, please direct it to our customer service department

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Top