Yamaha A-S2000 Natural Sound Stereo Integrated Amplifier (Silver)

Model: A-S2000SL UPC: 027108929064 Item: 155153

Product Information

A-S2000 Natural Sound Stereo Integrated Amplifier

Yamaha's involvement with and passion for music goes back more than a century, to when they built our first reed organ in 1887. Now they are the world's leading producer of pianos and other musical instruments, and are involved with music in many other ways as well. they manufacture professional recording equipment, they design concert halls and they assist artists at concerts with set up and sound tuning. This knowledge and experience benefits our production of audio components in many ways. They introduced our first HiFi (High Fidelity) turntable in 1954, becoming the first company to actually use the term HiFi. Thereafter they were one of the first to offer mass-produced, high quality audio equipment, and introduced many legendary stereo components. They hope you enjoy the genuine HiFi experience of Yamaha Natural Sound.

 

A-S2000 Highlights:

  • Full Floating and Balanced Circuit Design Achieves for the First Time the Full Potential of Analogue Amplification
  • Full-Stage Balanced Signal Transmission
  • Floating Balanced Power Amp
  • Fully Balanced Control Amp
  • Parallel Volume and Tone Controls
  • Symmetrical Construction
  • Specially Designed Feet
  • Headphone Amp for
  • Discrete Phono Amp

 

A-S2000 Specifications:

  • Maximum Power: (8 ohms, 1 kHz, 10% THD) 120 W + 120 W / (4 ohms, 1 kHz, 10% THD) 190 W + 190 W
  • Minimum RMS Output Power: (8 ohms, 20 Hz-20 kHz, 0.02% THD) 90 W + 90 W / (4 ohms, 20 Hz-20 kHz, 0.02% THD) 150 W + 150 W
  • Dynamic Power/Channel: (8 / 6 / 4 / 2 ohms) 105 / 135 / 190 / 220 W
  • Damping Factor (8 ohms, 20 Hz-20 kHz): 160
  • Input Sensitivity/ Impedance: CD 150 mV / 47 kilohm, Phono MM 2.5 mV / 47 kilohm, Phono MC 100 μV / 50 ohms, Main in 1 V / 47 kilohm
  • Frequency Response: CD, etc. to speaker out, Flat position 5 Hz-100 kHz +0 dB / -3 dB, CD, etc. to speaker out, Flat position 20 Hz-20 kHz +0 dB / -0.3 dB
  • RIAA Equalization Deviation: Phono MM (20 Hz-20 kHz) ±0.5 dB / Phono MC (20 Hz-20 kHz) ±0.5 dB
  • Total Harmonic Distortion (20 Hz–20 kHz): CD balanced to speaker out 0.01% (90 W / 8 ohms), CD, etc. to speaker out 0.015% (90 W / 8 ohms), Phono MM to rec out 0.005% (2 V), Phono MC to rec out 0.05% (2 V)
  • Signal-to-Noise Ratio [IHF-A Network]: CD, etc., (150 mV, Input Shorted) 98 dB, Phono MM (5 mV, Input Shorted) 93 dB, Phono MC (500 μV, Input Shorted) 85 dB
  • Residual Noise: CD, etc., IHF-A-Network
  • Channel Separation (1 kHz/10 kHz): CD, etc., Input 5.1 kilohm Terminaled 74 dB / 54 dB, Phono MM, Input Shorted, Vol: -30 dB 90 dB / 77 dB, Phono MC, Input Shorted, Vol: -30 dB 66 dB / 77 dB
  • Tone Control Characteristics: Bass Boost / Cut (at 50 Hz) ±9 dB, Bass Turnover Frequency 350 Hz, Treble Boost / Cut (at 20 Hz) ±9 dB, Treble Turnover Frequency 3.5 kHz
  • Audio Muting: -20 dB (approx.)
  • Load Impedance: If you use two sets (A and B), the impedance of each speaker must be 8 ohms or higher.
  • Dimensions (W x H x D): 17-1/8” x 5-3/8” x 18-5/16”
  • Weight: 50 lbs.

 

Documents

Top