Soaring to high-vibrational heights, the Totem Hawk exemplifies total involvement with the senses. Truly full range, extremely compact and aesthetically balanced, the Hawk has incredible attributes and strengths that will bring you to the realm of sonic nirvana. The Hawk’s detailed voicing, harmonic nuances and timbre precision will simply move your soul to the core.
With honesty and loyalty, the Hawk’s unique drivers deliver magic and power. Its exquisite cabinetry is designed to seamlessly project sonic vitality. Its self-effacing holography and pure dimensional imaging produce a spatial experience that will lift and envelope you. The Totem Hawk is a soul mover of the highest caliber.
- Elegant design and aesthetic compactness
- Specially modified proprietary drivers
- Designed for high-end extreme performance
- Absolute surreal holographic imaging
- Available in exotic veneer or design multicoated polyester finishes
- Great bass extension and phase correctness
- Monocoque cross-braced cabinet with double-sided wood veneer
- Ultra-expensive borosilicate damping
- Exclusive, hard-wired crossover
- Silvered OFC wiring
- Claw: for advanced decoupling from floor
- Bi-wireable gold-plated WBT terminals
|Break in time:||60 - 80 hours|
|Placement from rear wall:||1' - 6' / 304 - 1,829 mm|
|Placement distance apart:||3' - 8' / 914 - 2,438 mm|
|Mass Loading:||0.9 - 4.5 kg / 2 - 10 lb in each cabinet|
|Frequency Response:||<32 Hz - 21 kHz ± 3 dB (with proper room positioning)|
|Recommended Power:||30 - 120 W|
|Crossover frequency:||2.5 kHz, 1st order compensated|
|Woofer:||ø 5.5" / 140 mm Special extreme long throw. Non-resonant cone and dust cap. Dynamic linear suspension for maximum airflow. Patented magnet system.|
|Tweeter:||1" / 25 mm alloy dome Flexible linear suspension Special low resonance chambered unit|
|Max SPL's:||In average room (12' x 20' / 4 m x 6 m) 107 dB peak from pair at 7' / 2 m|
|Dimensions (w x h x d):||6.8 x 34.3 x 9.6" 172 x 870 x 244 mm|
The speakers require several hours of actual music playing time as a minimal break-in period. During this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the cohesiveness of the music reproduction as this occurs.
Mass Loading: All Totem columns work very well without any type of mass loading. However if stability is an issue or if there is a particular over emphasis in the bass in the room they are used in, then mass loading can be experimented with. Variables such as electronics, wiring and room dynamics play a definite role and therefore the option is there for your experimentation. One may use: clean dry sand,silica sand, dry particulate matter or non-odor kitty litter.
Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.