Home Theater Systems Buying Guide
Product Information
Specifications
Specifications
- Stereo Mode
- Output power: 135W/channel, 8Ω load, 20hZ to 20kHz, at <0.35% THD, both channels driven 270W/channel, 4Ω load, 20Hz to 20kHz
- Gain: 25.8dB
- Input sensitivity: 145mV RMS input for 2.83V RMS output
- Total harmonic distortion:
- <0.04% at 1kHz, 135W, 8Ω load
- <0.35% at 20kHz, 135W, 8Ω load
- Signal-to-noise ratio: >102dB, 20Hz to 20kHz, wideband, unweighted, referred to 135W/8Ω
- Bridged Monaural Mode
- Output power: 275W, 8Ω load, 20Hz to 20kHz, at <0.3% THD 550W, 4Ω load, 20Hz to 20kHz
- Gain: 31.8dB
- Input sensitivity: 73mV RMS input for 2.83V RMS output
- Total harmonic distortion:
- <0.4% at 1kHz, 275W, 8Ω load
- <0.3% at 20kHz, 275W, 8Ω load
- Signal-to-noise ratio: >105dB, 20Hz to 20kHz, wideband, unweighted, referred to 275W/8Ω
- General
- Frequency response:
- 20Hz to 20kHz, +0/-0.35dB
- <2Hz to 80kHz, +0/-3dB
- Input impedance:
- Balanced (XLR): 100kΩ
- Unbalanced/single-ended (RCA): 50kΩ
- Input connectors:
- 1 pair balanced line-level inputs (XLR)
- 1 pair single-ended line-level inputs (RCA)
- Output connectors: 2 pairs high current multi-way binding posts
- Control connectors:
- 1 RS-232 port (DB-9)
- 1 Ethernet port (RJ-45)
- 1 USB port for firmware updates (USB-A)
- 1 baseband IR input (1/8"/3.5mm phone jack)
- 1 programmable 12V DC trigger output, 100mA maximum (1/8"/3.5mm phone jack)
- 1 programmable 12V DC trigger input (1/8"/3.5mm phone jack)
- Power consumption:
- Maximum: 1000W
- On, idle (stereo mode): 90W
- On, idle (Bridged mode): 70W
- Normal standby: 35W
- Power Save standby: 2W
- Green Standby: <0.4W
- Dimensions/Weight:
- Unit only:
- Height: 5.72"
- Height without feet: 5.25"
- Width: 17.25"
- Depth, enclosure only: 18"
- Depth, with handles and speaker terminals: 20.75"
- Weight: 70 lbs
- Unit only:
- Frequency response:
What's in the Box
What's in the Box
- IEC power cord
- Owner's manual
- Safety information sheet