JL Audio XD600/1v2 Monoblock Class D Subwoofer Amplifier

Model: 98604 UPC: 699440986045 Item: 163395

In Stock
Shipping Information
Show Store Details
Address:
104 E Vine St. Hatfield, PA 19440
Hours:
  • Mon - Fri: 9am - 5pm
  • Sat: By appointment only
  • Sun: Closed
Phone:
(866) 961-7781
Show Store Details
Address:
754 Route 309 (Bethlehem Pike) Montgomeryville, PA 18936
Hours:
  • Mon: 9:30am - 8pm
  • Tues - Fri: 9:30am - 6pm
  • Sat: 9:30am - 6pm
  • Sun: 11am - 5pm
Phone:
(215) 368-8343
Show Store Details
Address:
38 Greenfield Avenue, Ardmore, PA 19003
Hours:
  • Mon - Tues: 10am - 6pm
  • Wed: 10am - 8pm
  • Thurs - Fri: 10am - 6pm
  • Sat: 10am - 5pm
  • Sun: 12pm - 5pm
Phone:
(610) 649-7002
Choose a Store Location

More Product Details

Questions? We're here to help.

Efficiency and strong power output are the keys to the XD-series amplifiers. The XD600/1V2 monoblock digital amplifier is no exception. It can push 400 watts out through its single channel at 4 ohms or 600 watts at 2 ohms. That's impressive - especially when you see how small this amplifier is. Add the HD-RLC remote bass knob for subwoofer volume adjustments from the driver's seat.

JL Audio XD600/1V2 Features:

  • Compact monoblock digital amplifier
  • Class D design for incredible efficiency
  • 400 watts x 1 @ 4 ohms
  • NexD technology for exceptional sound quality

Product Information

XD600/1v2 Monoblock Class D Subwoofer Amplifier, 600 W x 1 @ 2 ohms / 400 W x 1 @ 4 ohms - 14.4V

This potent monoblock amplifier employs JL Audio's high-speed NexD switching design to achieve unprecedented efficiency and amazing power output in a very compact chassis. Don't let the small size fool you, though... this amplifier is capable of serious subwoofer power, delivering a full 600 W of continuous power into a 2 ohm load (14.4V, 1% THD).

Targeted specifically for subwoofer applications, the XD600/1v2 includes a variable slope low-pass filter with continuously variable cutoff frequency selection from 50-500 Hz.

The XD600/1v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be directly controlled from the driver's seat.

This amplifier features a black powder-coat finish and a gasketed, brushed aluminum cover for the controls.

XD600/1v2 Specifications:

RMS Power @ 14.4 V

  • @ 4 ohms: 400 W RMS x 1
  • @ 3 ohms: 500 W RMS x 1
  • @ 2 ohms: 600 W RMS x 1
  • @ 1.5 ohms: N/A

RMS Power @ 12.5 V

  • @ 4 ohms: 300 W RMS x 1
  • @ 3 ohms: 400 W RMS x 1
  • @ 2 ohms: 500 W RMS x 1
  • @ 1.5 ohms: N/A

General

  • Frequency Response: 7 Hz - 500 Hz (+0, -1dB)
  • S/N Ratio, referred to highest rated power: >87 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • S/N Ratio, referred to 1 W: >67 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • Damping Factor @ 4 ohms: >1000 / 50 Hz
  • Damping Factor @ 2 ohms: >500 / 50 Hz
  • THD+N @ Rated Power: <1% @ 2 ohms per ch
  • Input Voltage Range @ RCA Inputs: Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
  • Min Copper Power / Ground Wire Gauge: 4 AWG wire
  • Fuse Rating: 50 A (AFS, AGU or MaxiFuse)

Signal Processing

  • Filter Modes: Low-Pass only
  • Filter Slope (dB/Octave): 12 dB or 24 dB
  • Filter Frequency Range: 50-500 Hz
  • Detented, Calibrated Filter Freq. Pentiometer: Yes
  • Filter Defeatable?: Yes
  • Infrasonic Filter: 30 Hz, defeatable
  • Bass Boost EQ: No
  • Output Polarity Switch: No
  • Remote Subwoofer Level Control: Optional (HD-RLC)
  • Remote Bass EQ Boost Control: No
  • Pass-Through Preamp Output: Buffered

Dimensions

  • Height: 2.05 in
  • Width: 8.52 in
  • Depth: 7.09 in
  • Weight: 6.3 lbs

Documents

Top