JL Audio M800/8v2 8Ch Class D Marine Full-Range Amplifier

Model: 98359 UPC: 699440983594 Item: 163864

Product Information

M800/8v2 8-Channel Class D Marine Full-Range Amplifier, 100 W x 8 @ 2 ohms / 75 W x 8 @ 4 ohms - 14.4V

This incredibly flexible amplifier packs a serious full-range punch and delivers a staggering 100 watts to each of its eight channels into 2 ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is our NexD ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.

The M800/8v2 includes a 12 dB / octave filter for each channel bank, which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. The M800/8v2 also features the v2 Spec feature set, which consists of automatic turn-on capability (via signal sensing or DC-offset sensing), and a dual-range differential-balanced input section able to handle a wide range of input voltage levels. With the addition of an HD-RLC remote level control (sold separately), you have the ability to control the level of two, four, six, or all eight of the amplifier's channel levels from the driver's seat.

Use it in one of many useful configurations:

  • Eight-channel Satellite Amp: drive four pairs of speakers with 75 W x 8
  • Six-Channel System Amp: drive front and rear satellites with 75 W x 4 @ 4 ohms, plus two 4 ohms subwoofers with 200 W each
  • Staggered Six-Channel Satellite Amp: drive two speakers with 200 W x 2 @ 4 ohms, plus four 4 ohms speakers with 75 W each
  • Big Four-Channel Satellite Amp: bridge to produce 200W x 4 @ 4 ohms
  • Four-Channel System Amp: drive left and right speakers with 200W x 2 @ 4 ohms, plus two 4 ohms subwoofers with 200W each

This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

 

M800/8v2 Specifications:

RMS Power @ 14.4 V

  • @ 4 ohms: 75 W RMS x 8
  • @ 2 ohms: 100 W RMS x 8
  • Bridged @ 4 ohms: 200 W RMS x 4

RMS Power @ 12.5 V

  • @ 4 ohms: 60 W RMS x 8
  • @ 2 ohms: 90 W RMS x 8
  • Bridged @ 4 ohms: 180 W RMS x 4

General

  • Frequency Response: 12 Hz - 22 kHz (+0, -1dB)
  • S/N Ratio, referred to highest rated power: >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • S/N Ratio, referred to 1 W: >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • Damping Factor @ 4 ohms: >150 / 50 Hz
  • Damping Factor @ 2 ohms: >75 / 50 Hz
  • THD+N @ Rated Power: <1% @ 2 ohms per ch
  • Input Voltage Range @ RCA Inputs: 200 mV - 8 V RMS
  • Min Copper Power / Ground Wire Gauge: 4 AWG wire
  • Fuse Rating: 80 A (AFS, AGU or MaxiFuse)

Signal Processing

  • Filter Modes: Low-Pass or High-Pass
  • Filter Slope (dB/Octave): 12 dB
  • Filter Frequency Range: 50-500 Hz
  • Detented, Calibrated Filter Freq. Pentiometer: Yes
  • Filter Defeatable?: Yes
  • Remote Level Control: Optional (HD-RLC)
  • Remote Level Modes: 2 or 4 or All Channels
  • Channel Input Mode Switch: Yes (2/4/6 ch)
  • Pass-Through Preamp Output: None
  • Source Channel Selection for PreOuts: N/A

Dimensions

  • Height: 2.05 in
  • Width: 14.73 in
  • Depth: 7.09 in

Documents

Top