JL Audio M200/2 2-Channel Class D Full-Range Marine Amplifier

Model: M2002 UPC: 699440982702 Item: 165459

Your next boat party takes it to the next level with the JL Audio M200/2 2-Channel Class D Marine Amplifier. This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 Ohms. The breakthrough that makes this much power possible in such a small chassis is JL Audio’s NexD ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.

Product Information

JL Audio M200/2 2-Channel Class D Marine Full-Range Amplifier, 100 W x 2 @ 2 Ohms / 75 W x 2 @ 4Ohms - 14.4V

This tiny amplifier packs a serious full-range punch, delivering a staggering 100 watts per channel into 2 Ohms (14.4V, 1% THD). The breakthrough that makes this much power possible in such a small chassis is JL Audio’s NexD ultra-high-speed switching design, which allows for full bandwidth Class D operation with extremely low distortion and outstanding efficiency.

The M200/2 includes a 12 dB / octave filter which can be configured as a low-pass or high-pass filter and offers continuously variable cutoff frequency selection from 50-500 Hz. With the addition of an HD-RLC remote level control (sold separately), the amplifier's level can be controlled from a remote location.

This marine amplifier features white and gray powder-coat finishes, a gasketed cover for the controls and stainless steel hardware for durability in the marine environment.

Specifications

JL Audio M200/2 2-Channel Marine Amplifier Specifications:

RMS Power @ 14.4V:

  • @ 4 Ohms: 75 W RMS x 2
  • @ 2 Ohms: 100 W RMS x 2
  • Bridged @ 4 Ohms: 200 W RMS x 1

RMS Power @ 12.5V:

  • @ 4 Ohms: 60 W RMS x 2
  • @ 2 Ohms: 90 W RMS x 2
  • Bridged @ 4 Ohms: 180 W RMS x 1

General:

  • Frequency Response: 12 Hz - 22 kHz (+0, -1dB)
  • S/N Ratio, referred to highest rated power: >104 dB below rated power (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • S/N Ratio, referred to 1 W: >84 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • Damping Factor @ 4 Ohms: >150 / 50 Hz
  • Damping Factor @ 2 Ohms: >75 / 50 Hz
  • THD+N @ Rated Power: <1% @ 2 Ohms per Ch.
  • Input Voltage Range @ RCA Inputs: 100 mV - 4 V RMS
  • Copper Power / Ground Wire Gauge: 8 AWG wire
  • Fuse Rating: 20 A (AFS, AGU or MaxiFuse)

Signal Processing:

  • Filter Mode(s): Low-Pass or High-Pass
  • Filter Slope(s): 12 dB/octave
  • Filter Frequency Range: 50 Hz - 500 Hz
  • Detented, Calibrated Filter Freq. Potentiometers: Yes
  • Filter Defeat Function: Yes
  • Remote Level Control: Optional (HD-RLC)
  • Remote Level Modes: N/A
  • Channel Input Mode Switch: N/A
  • Pass-Through Preamp Output: Buffered
  • Source Channel Selection for PreOuts: N/A

Physical:

  • Height (H): 2.05 in / 52 mm
  • Width (W): 6.85 in / 174 mm
  • Depth (D): 7.09 in / 180 mm
  • Net Weight: 3.75 lb / 1.70 kg

Reviews

Customer Reviews for JL Audio M200/2 2-Channel Class D Full-Range Marine Amplifier

There are no reviews for this item. Write Review

Q&A

Customer Q & A

Have a functionality, compatibility, or otherwise product-specific question about this product? Ask it here! If you have a customer service or shipping question, please direct it to our customer service department

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Top