JL Audio Fathom IWS-SYS-1 In-Wall Subwoofer System

Model: IWS-SYS-1 UPC: 02041399 Item: 164363

Product Information

Fathom IWS-SYS-1 In-Wall Subwoofer System

In-Wall Subwoofer System with Single 13.5-inch Subwoofer Driver, 1000 watts

The same minds that engineered JL Audio's reference-grade Fathom and Gotham powered subwoofers have created an amazing in-wall subwoofer solution, centered on a purpose-engineered, thin-line driver with patented technology. Housing this exotic driver is a critically engineered enclosure with a unique floating mount design to minimize wall excitation. The enclosure features extensive architectural features aimed at improving rigidity while keeping a very low profile and minimal wall thickness.

A paintable, fine steel-mesh grille, also designed to control vibration, is included for each enclosure in a system. The IWS System One is available to fit a variety of 2" x 4" and 2" x 6" wall studs. The IWS System One is driven by a rack-mountable, purpose-tuned amplifier, capable of delivering up to 1 kW of clean power, and armed with serious processing features, including our acclaimed Automatic Room Optimization system. There is no need to lower your expectations when selecting this remarkable in-wall solution... it's a real Fathom.

 

Fathom IWS-SYS-1 Specifications:

General

  • Enclosure Type: Sealed
  • Enclosure Finish: Black Texture-Coated
  • Frequency Response (Anechoic): 26 Hz - 101 Hz (+/ 1.5 dB) -3 dB at 25 Hz / 112 Hz - 10 dB at 22 Hz / 150 Hz
  • Effective Piston Area (Sd): 98.26 sq in / 0.0634 sq m
  • Effective Displacement: 147.3 cu in / 2.41 L
  • Amplifier Power: 1000 W RMS short-term
  • Power Modes: Off, On or Automatic (Signal-Sensing)

Signal Processing

  • Unbalanced Inputs: Stereo or Mono (two RCA jacks)
  • Balanced Inputs: Stereo or Mono (two female XLR jacks)
  • Input Grounding: Isolated or Grounded
  • Input Modes: Master or Slave
  • Level Control: Reference (fixed gain) or Variable, from full mute to +15dB over reference gain
  • Filter Mode: Low-Pass
  • Filter Slope (dB/Octave): 12 dB or 24 dB
  • Filter Frequency Range: 30 Hz - 130 Hz
  • Filter Defeatable: Yes
  • Polarity: 0 or 180 degrees
  • Phase: Variable, 0-270 degrees, referenced to 80 Hz
  • Extreme Low Frequency (E.L.F.) Trim: Variable, -12 dB to + 3 dB at 23 Hz
  • Output to Slave: Balanced (one male XLR jack)
  • Calibration Mode: Automatic Room Optimization (A.R.O.), includes laboratory-grade microphone

2 x 4" Wall Stud Enclosure Physical Specs

  • Width: 13.75 in / 349 mm
  • Height: 70 in / 1,778 mm
  • Depth: 2.94 in / 75 mm

2 x 6" Wall Stud Enclosure Physical Specs

  • Width: 13.75 in / 349 mm
  • Height: 55 in / 1,397 mm
  • Depth: 4.70 in / 119 mm

Amplifier Physical Specs

  • Width: 17.4 in / 442 mm
  • Height: 3.5 in / 89 mm
  • Depth: 17.9 in / 455 mm
  • Net Weight: 35 lb / 15.9 kg

Grille Physical Specs

  • Grille Width: 20 in / 508 mm
  • Grille Height: 17.25 in / 438 mm
  • Wall Opening Width: 17.25 in / 438 mm
  • Wall Opening Height: 14.5 in / 368 mm

Documents

Top