JBL Club 1000AM 1000-Watt @ 2 Ohms Class D Subwoofer Amplifier with Remote Level Control

Model: AMPCBA1000AM UPC: 050036369183 Item: 175238

$429.95 OR

Regular Price: $479.00

Save: $49.05 (10%)

In Stock
Shipping Information
Show Store Details
Address:
754 Route 309 (Bethlehem Pike) Montgomeryville, PA 18936
Hours:
  • Mon: CLOSED
  • Tues - Sat: 10AM - 5PM
  • Sun: CLOSED
Phone:
(215) 368-8343
Show Store Details
Address:
38 Greenfield Avenue, Ardmore, PA 19003
Hours:
  • Mon: CLOSED
  • Tues - Sat: 10AM - 5PM
  • Sun: CLOSED
Phone:
(610) 649-7002
Choose a Store Location

More Product Details

Our product experts are here to help

Questions? We're here to help.

Product Information

Value engineered car amplifier with JBL power and performance

The JBL Club A1000 mono subwoofer amplifier delivers 1000-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw. Speaker-level inputs allow this amplifier to integrate into almost any system, even one using your car’s
factory radio. You can use the low-pass filter and variable bass boost to maximize the performance of your subwoofer and enclosure, while a phase switch ensures that the bass will blend well with your full-range speakers.

Features

  • Compact size
  • High and low level input
  • Variable crossover and bass boost
  • Low noise and distortion
  • Input Level Control
  • Full on-board protection
  • Phase Switch
  • RBC wired remote
  • Strappable for up to 2,000 watts of
  • power at 4 ohms
  • Class D amp technology
  • Turn-on mode

Compact size

The JBL Club A1000 amplifier features a low-profile chassis and a small overall footprint to fit in more vehicles where available space is limited.

High and low level input

Speaker-level and low-level inputs allow the Club A1000 to integrate with both aftermarket and factory car stereo systems.

Variable crossover and bass boost

Unlike many amplifiers available at similar prices, the JBL Club A1000 features variable electronic crossovers and bass boost circuits allowing for precise system tuning and performance.

Low noise and distortion

The Club A1000 has been engineered using Balanced Differential Inputs to ensure low noise and distortion even at high output levels. This also makes it far less susceptible to line induced radiated engine noise.

Input Level Control

When low-level inputs are used, this control adjusts the input sensitivity between 200mVrms and 2.0 Vrms. When high-level inputs are used, this control adjusts the input sensitivity between 2Vrms and 20Vrms.

Full on-board protection

On-board circuitry protects the Club A1000 from shorts, high-temperature, overvoltage and undervoltage. An LED indicator is provided to let you know when one of these conditions exists.

Phase Switch

This switch changes the input phase to inverted or non-inverted. This is especially helpful as part of system tuning based on the enclosure type and location in the vehicle.

RBC wired remote

The RBC wired remote is an easy installation and can be mounted for convenient volume adjustment from driver’s seat.

Strappable for up to 2,000 watts of power at 4 ohms

Enable to strap two Club A1000 together to double your power. The master amp will be in absolute control of slave in terms of the crossover points, the gain and remote level control.

Class D amp technology

The JBL Club A1000 mono subwoofer amplifier delivers 1000-Watts RMS using a Class D amplifier design to ensure high output and minimum current draw.

Turn-on mode

This switch changes DC to REM to adapt with low-level signals or high-level signals, this is especially helpful as part of remote turn-on lead of your installation more choice. A selectable “Turn-on mode” can protect battery to avoid current drain, when you don’t expect turn on your amplifier.

Specifications

Specifications

  • Mono subwoofer car amplifier
  • 600 watts RMS x 1 at 4 ohms (1000 watts RMS x 1 at 2 ohms)
  • Class D amp technology
  • Frequency response: 10–320Hz
  • Variable low-pass filter (32–320Hz, 12dB/octave)
  • Variable bass boost (0-12dB at 45Hz)
  • Phase switch (0, 180 degrees)
  • Wired remote level control included
  • Preamp inputs and outputs
  • Speaker-level inputs (speaker wire-to-RCA adapters included)
  • 4-gauge power and ground leads recommended — wiring and hardware not included with amplifier
  • Fuse rating: 35A x 3
  • Dimensions (W x H x D) = 12-5/8" x 2-1/16" x 7-1/8"

What's in the Box

What's in the Box

  • One Club A1000 mono subwoofer car amplifier
  • Six 35A ATO fuses (3 installed, 3 spare)
  • 2 Bare wire-to-RCA adapters
  • Remote bass control module
  • 16.5' Remote control cable (RJ-25 plugs on
  • both ends)
  • 2 Self-tapping screws for remote (M3 x 15mm)
  • 4 Mounting screws (M4 x 53mm)
  • Owner’s Manual
  • Two JBL stickers
  • 1 logo badage

Reviews

Customer Reviews for JBL Club 1000AM 1000-Watt @ 2 Ohms Class D Subwoofer Amplifier with Remote Level Control

There are no reviews for this item. Write Review

Q&A

Customer Q & A

Have a functionality, compatibility, or otherwise product-specific question about this product? Ask it here! If you have a customer service or shipping question, please direct it to our customer service department

Start typing your question and we'll check if it was already asked and answered. Learn More
No questions have been asked about this item. Be the first!
Top